To Next PageTo Next PageWhat to do if the image on the Samsung IP Camera screen is dark?
If the image on the screen of your Samsung IP Camera is too dark, you can try these solutions: First, adjust the contrast settings on your monitor. Second, if you are using an intermediate device, ensure that the 75? / Hi-z setting is properly configured.
Why is the image on my Samsung IP Camera screen dim?
If the image on your Samsung IP Camera screen is dim, try the following: First, check the lens for dirt and clean it gently with a soft, clean cloth. Next, ensure your monitor is set to the correct display settings. Finally, if the camera is facing a very bright light source, try repositioning it.
What to do if the DAY/NIGHT menu does not work on Samsung Security Camera?
If the DAY/NIGHT menu on your Samsung Security Camera is not working, ensure that the AGC setting in the EXPOSURE SETUP menu is set to ‘OFF’.
What to do if the Motion Detection function does not work on Samsung Security Camera?
If the Motion Detection function on your Samsung Security Camera is not working, check that the MOTION DEF setting in the SPECIAL SETUP menu is set to ‘OFF’.
Why doesn't the SENS-UP function work on my Samsung SID-460 Security Camera?
If the SENS-UP function is not working on your Samsung Security Camera, verify that the AGC setting in the EXPOSURE SETUP menu is set to ‘OFF’. Also, confirm that the SHUTTER setting in the EXPOSURE SETUP menu is set to ‘A.FLK’ or ‘MANUAL’.
What to do if nothing appears on the screen of my Samsung IP Camera?
If nothing appears on the screen when using your Samsung IP Camera, first, make sure the power cord and the connection between the camera and the monitor are properly secured. Secondly, verify that you have correctly connected the VIDEO cable to the camera's VIDEO output jack.
Why is my Samsung IP Camera hot and not working properly?
If your Samsung IP Camera is not working correctly and feels hot, ensure that it is connected to the correct power source.
How to fix the DAY/NIGHT menu on my Samsung IP Camera?
If the DAY/NIGHT menu is not working on your Samsung IP Camera, check that the AGC (Automatic Gain Control) setting in the EXPOSURE SETUP menu is set to ‘OFF’.
Why doesn't the SENS-UP function work on my Samsung IP Camera?
If the SENS-UP function is not working on your Samsung IP Camera, first verify that the AGC setting in the EXPOSURE SETUP menu is set to ‘OFF’. Also, check that the SHUTTER setting in the EXPOSURE SETUP menu is set to either ‘A.FLK’ or ‘MANUAL’.
How to correct the color on my Samsung IP Camera?
If the color on your Samsung IP Camera is not correct, check the settings in the WHITE BAL SETUP menu.
Describes the camera's high-resolution image quality using SONY CCD sensors.
Highlights the camera's ability to capture clear images in low light conditions.
Explains the SSNR function for reducing noise in digital image processing.
Details the automatic switching between color and B/W modes based on lighting.
Covers the DIS function to compensate for camera movement for stable pictures.
Explains the sub monitor function for easy angle adjustment during installation.
Describes the flexible 3-axis construction for versatile mounting.
Lists additional features like HLC, SENS-UP, FREEZE, FLIP, D-ZOOM, SHARPNESS, MOTION DETECTION, PRIVACY.
Notes support for remote OSD menu control via RS-485 interface.
Provides essential safety information to prevent injury and material loss.
Offers instructions for the correct and environmentally safe disposal of the product.
Advises on installation conditions regarding temperature and lighting stability.
Recommends avoiding high humidity and protecting the camera lens.
Warns against physical shock and direct exposure to strong light.
Warns against exposing the camera to radioactivity, which can cause malfunction.
Provides notes regarding spotlights, power checks, and connection procedures.
Covers general guidelines and notes for installing the camera safely and securely.
Details the process of mounting the camera using an adapter plate and screws.
Explains how to adjust the camera's panning, tilting, and rotating angles for optimal view.
Guides on how to connect the camera's video output to a monitor's input jack.
Details the procedure for connecting the camera to a power source via an adapter.
Explains how to set up and use RS-485 communication for remote camera control.
Provides an overview of the camera's menu structure and available configuration options.
Details how to navigate and use the camera's setup menu using the function switch.
Explains how to adjust white balance settings for accurate color representation.
Covers BLC and HLC functions for improving image quality in backlight situations.
Describes the SSNR function for reducing background noise in low light environments.
Explains the automatic switching between color and B/W modes based on ambient light.
Details features like FREEZE, V-REV, H-REV, D-ZOOM, and SHARPNESS adjustments.
Covers advanced settings like CAM TITLE, MOTION DET, PRIVACY, DIS, COMM ADJ, LANGUAGE.
Explains how to configure motion detection zones, sensitivity, and related settings.
Guides on how to hide specific areas of the screen using the privacy function.
Describes the DIS function to mitigate picture movement due to external factors.
Details camera communication status settings for external control devices.
Covers menu language selection and resetting camera settings to factory defaults.
Explains how to save settings and exit the camera's menu system.
Provides solutions for situations where no image or a dim image is displayed on the screen.
Offers advice for dark images, contrast settings, and if the camera becomes hot.
Addresses problems related to the Day/Night mode or SENS-UP function not working.
Guides on resolving issues with motion detection not working or incorrect color display.
Offers solutions for a flickering screen, often related to camera direction towards the sun.
Provides steps to troubleshoot RS-485 communication failures and connection issues.
Describes the camera's high-resolution image quality using SONY CCD sensors.
Highlights the camera's ability to capture clear images in low light conditions.
Explains the SSNR function for reducing noise in digital image processing.
Details the automatic switching between color and B/W modes based on lighting.
Covers the DIS function to compensate for camera movement for stable pictures.
Explains the sub monitor function for easy angle adjustment during installation.
Describes the flexible 3-axis construction for versatile mounting.
Lists additional features like HLC, SENS-UP, FREEZE, FLIP, D-ZOOM, SHARPNESS, MOTION DETECTION, PRIVACY.
Notes support for remote OSD menu control via RS-485 interface.
Provides essential safety information to prevent injury and material loss.
Offers instructions for the correct and environmentally safe disposal of the product.
Advises on installation conditions regarding temperature and lighting stability.
Recommends avoiding high humidity and protecting the camera lens.
Warns against physical shock and direct exposure to strong light.
Warns against exposing the camera to radioactivity, which can cause malfunction.
Provides notes regarding spotlights, power checks, and connection procedures.
Covers general guidelines and notes for installing the camera safely and securely.
Details the process of mounting the camera using an adapter plate and screws.
Explains how to adjust the camera's panning, tilting, and rotating angles for optimal view.
Guides on how to connect the camera's video output to a monitor's input jack.
Details the procedure for connecting the camera to a power source via an adapter.
Explains how to set up and use RS-485 communication for remote camera control.
Provides an overview of the camera's menu structure and available configuration options.
Details how to navigate and use the camera's setup menu using the function switch.
Explains how to adjust white balance settings for accurate color representation.
Covers BLC and HLC functions for improving image quality in backlight situations.
Describes the SSNR function for reducing background noise in low light environments.
Explains the automatic switching between color and B/W modes based on ambient light.
Details features like FREEZE, V-REV, H-REV, D-ZOOM, and SHARPNESS adjustments.
Covers advanced settings like CAM TITLE, MOTION DET, PRIVACY, DIS, COMM ADJ, LANGUAGE.
Explains how to configure motion detection zones, sensitivity, and related settings.
Guides on how to hide specific areas of the screen using the privacy function.
Describes the DIS function to mitigate picture movement due to external factors.
Details camera communication status settings for external control devices.
Covers menu language selection and resetting camera settings to factory defaults.
Explains how to save settings and exit the camera's menu system.
Provides solutions for situations where no image or a dim image is displayed on the screen.
Offers advice for dark images, contrast settings, and if the camera becomes hot.
Addresses problems related to the Day/Night mode or SENS-UP function not working.
Guides on resolving issues with motion detection not working or incorrect color display.
Offers solutions for a flickering screen, often related to camera direction towards the sun.
Provides steps to troubleshoot RS-485 communication failures and connection issues.
General| Brand | Samsung |
|---|---|
| Model | SID-460 |
| Category | Security Camera |
| Language | English |
