Samsung SIR-4260V - Camera Settings: Backlight Compensation; BLC and HLC Functionality

COLOR DOME CAMERA User’s Manual
22
COLOR DOME CAMERA User’s Manual
23
• For effective viewing of license plates, there is a minimum required illumination and the
shutter speed needs to be faster than 1/200sec.
• Because there can be a difference in the effectiveness of HLC according to the amount of
light area in the screen, optimize the installation angle for the best HLC performance.
• When dark, the HLC is only activated when a bright light exceeding a specific size in NIGHT
ONLY mode.
• The HLC is not activated in day light or when bright light is not present at night in NIGHT
ONLY mode.
• BLC Function doesn't work in the B/W mode of the DAY/NIGHT menu.
Notes
3.SelectadesiredmodeusingtheFunctionSetupswitchandpresstheFunctionSetupswitch.
1 7 2
5
1 2 0
LOW

Select ‘BLC’ to adjust the area to be
enhanced then adjust the level.
HLC:Enabletheusertochangethelevel,
limit, mask color/tone and area.

HLC(HighLightCompensation):
If the scene contains extremely brightly light areas such as; from car headlights, the light
canmaskoutmuchoftheon-screendetail.UsingSamsungTechwin'sHLCfeatureto
remove exceptionally brightly light areas allows details such as car number plates to
become visible.
  -LEVEL:AdjustleveloftheHLCfunction.
- LIMIT : Enable to change the operating condition.
  -MASKCOLOR/TONE:Changethecolor/transparencyofthemaskingarea.
(Black,Red,Blue,Cyan,Magenta)
  -TOP/BOTTOM/LEFT/RIGHT:Adjusttheareatobeenhanced
HLCMASKINGAREA
HLCON
HLCOFF
OFF:Notbeingused
2.SelectadesiredmodeusingtheFunctionSetup.

BLC : Enables a user to directly select a desired area from a picture, and to view the
area more clearly.
BLCON
BLCOFF
MAIN SETUP
1.LENS DC
2.EXPOSURE
3.WHITE BAL ATW
4.SSDR
OFF
5.BACKLIGHT OFF
6.SSNR3 ON
BACKLIGHT
Unlike conventional cameras, the SIR-4260V is designed to deliver a distinctive subject and
background at the same time, even when the subject is backlight, by using the features of the
proprietary W-V DSP chip.
1.WhentheSETUPmenuscreenisdisplayed,select‘BACKLIGHT’byusingtheFunctionSetup
switchsothatthearrowindicates‘BACKLIGHT’.
Operating Your Camera