English-10
Connecting network
7
8
6
5
5. Press the [Setting Start] tab.
6. Select the wireless router that you are using now.
- When using free wireless router,refer to the corresponding user manual for password.
7. After entering the password of selected wireless router,press the [OK] tab.
- When the password has not been set, press the [OK] tab without entering the password.
8. Enter the information of wireless router and press the [OK] tab.
- Required information is; SSID, Security type, Encryption type and Password.
• If you do not know the information of wireless router, check its manual or contact your ISP (internet service
provider).
9. When 'Transfer complete' pop up comes on, press the [OK] tab.
10. Select [Settings] [Wi-Fi] on your iPhone.
11. Select the wireless router that you are using, and enter the password.
- When the Wi-Fi ( ) indicator is on, the air conditioner is connected with wireless router and the internet.
- When the Wi-Fi ( ) indicator blinks, the air conditioner is connected to wireless router but not with internet. In this
case, check the internet connection.
- When the Wi-Fi ( ) indicator is o, the air conditioner is not connected with wireless router and the internet.
12. After 2 minutes, if the Wi-Fi LED of the air conditioner is still on, it means the conguration has succeeded. At this point,
you can use smart phone to control the system.
• When searching a network by pressing the [Wi-Fi] button, message will be displayed on the front display a
maximum of 5 minutes.
• Supportedmodelsare;iPhone4,iPhone4S,iPhone5andothermodelscanbeaddedinthefuture.
NOTE
NOTE
CAUTION
A3050 ET WiFi APP_IB_04209A-00_EN.indd 10 2013-10-11 14:49:36
To Next Page
Loading...
Need help?
General
