Samsung Smart A/C application User Manual

English-11
PREPARATION01
Connecting network with WPS setting
2
1-2
1-1
1. After pressing the [2
nd
F] button on the remote controller, press the [WPS] button.
message will be displayed on the front display panel of the air conditioner.
2. Press [WPS] button on the wireless router that will be connected to an air conditioner and operate the WPS function of
the wireless router. (The location of WPS button may be dierent depending on the wireless manufacturing company.)
3. After connecting the air conditioner with the wireless router correctly, the Wi-Fi ( ) light on the Wi-Fi module will be
on.
• Check whether the wireless router supports Wi-Fi Protected Setup™(WPS).
• CheckwhetherthewirelessrouterhasWPSbutton.
• SamsungsmartairconditionerusesPBCmethodofWPS.
• Whensearchinganetworkbypressing[WPS]button,theremotecontrollerwillnotworkforamaximumof2
minutes.
• BecarefulwhenpressingtheWPSbuttonbecauseifyouholdtheWPSbuttonforalongtime,thesetvalueofthe
wireless router will be initialized with some types of wireless router.
• OperatingwirelessrouterthroughWPSmodemightbedierentdependingonthemanufacturingcompany.
Therefore, please refer to the user manual of your wireless router.
• If the wireless router(AP) is not authenticated with WPS, connection failure might occur.
• Someofthewirelessrouters(includingwirelessroutersthatarenotauthenticatedwithWPS)mayloseconnection
with previously connected devices when the air conditioner establishes connection with wireless router.
NOTE
CAUTION
A3050 ET WiFi APP_IB_04209A-00_EN.indd 11 2013-10-11 14:49:37

Samsung Smart A/C application Specifications

General

Brand	Samsung
Model	Smart A/C application
Category	Air Conditioner
Language	English