English-8
Connecting network
4
5
6
4. Select the wireless router that you are using now.
- When using free wireless router, refer to the corresponding user manual for password.
5. After entering the password of selected wireless router, press the [OK] tab.
- When the password has not been set, press the [OK] tab without entering the password.
6. When 'Transfer complete' pop up comes on, press the [OK] tab.
- When the Wi-Fi ( ) indicator is on, the air conditioner is connected with wireless router and the internet.
- When the Wi-Fi ( ) indicator blinks, the air conditioner is connected to wireless router but not with internet. In this
case, check the internet connection.
- When the Wi-Fi ( ) indicator is o, the air conditioner is not connected with wireless router and the internet.
7. After 1~2 minutes, if the Wi-Fi LED of the air conditioner is still on, it means the conguration has succeeded. At this point,
you can use smart phone to control the system.
• When searching a network by pressing the [Wi-Fi] button, message will be displayed on the front display a
maximum of 5 minute.
• Smart A/C application is optimized with Samsung smart phones. Supported models are; Samsung Galaxy Phone
series and other models can be added in the future. When the Smart A/C application is used with other smart
phones, some functions may not work.
NOTE
CAUTION
A3050 ET WiFi APP_IB_04209A-00_EN.indd 8 2013-10-11 14:49:35
To Next Page
Loading...
