Why does my Samsung SNB-1001 Security Camera viewer get disconnected during monitoring?
If you are disconnected during monitoring with your Samsung Security Camera, verify all network connections. Also, if the camera is connected over a PPPoE network, disconnections can occur under poor network conditions.
What to do if Samsung SNB-1001 Security Camera does not recognize SD memory card?
If your Samsung Security Camera doesn't recognize the SD memory card, first, check that the card is inserted in the correct direction. If it was formatted by another device, format the memory card again in the camera's menu under Setup > Event > SD Record.
Why Samsung SNB-1001 images overlap?
If you're experiencing overlapping images with your Samsung Security Camera, check whether two or more cameras are set to a single multicast address instead of different addresses.
General| Effective Pixels | 1280(H) x 720(V) |
|---|---|
| Video Output | CVBS : 1.0 Vp-p / 75 Ohms composite |
| Power Consumption | Max. 2.5W |
| Synchronization | Internal |
| Focal Length | 3.6mm |
| Operating Temperature | -10°C ~ +50°C |
| Power Supply | DC 12V |
To Next Page