Samsung SNB-3000 - Connecting the Camera Directly to Local Area Networking

34_ network connection and setup
network connection and setup
When the Broadband Router is connected, the login window appears and prompts
you to enter the password.
For the login IP and the password, refer to the
Broadband Router’s documentation.
When done, you will see the setup window of the
Broadband Router. In the setup
menu, select “Automatic Confi guration-DHCP” for Internet Connection Type.
For the menu location of Internet Connection Type or DHCP selection, refer to the
Broadband
Router’s documentation.
When done, click the [Save] or [Apply] button to save the settings.
CONNECTING THE CAMERA DIRECTLY TO LOCAL AREA
NETWORKING
Connecting to the camera from a local PC in the LAN
Launch an Internet browser on the local PC.
Enter the IP address of the camera in the address bar of the browser.
A remote PC in an external Internet out of the LAN network may not be able to connect to the
camera installed in the intranet if the port-forwarding is not properly set or a fi rewall is set.
In this case, to resolve the problem, contact your network administrator.
4.

5.

6.
1.
2.
M

⦐䀠Gwj
㞬⺴G㠄󰵾Gwj
ⵝ䞈ⷱ
kkuzG㉐ⶸ
OkGjSGrvylhP
SNB-3000
SNB-3000
Local PC
Firewall
External Remote PC
DDNS Server
(Data Center, KOREA)
INTERNET
Switch
HUB