Samsung SNB-3000 - Accessing the Setup Screen; Default Setup

50_ setup screen
ACCESSING THE SETUP SCREEN
You can configure the default setting, system, overlay, event and network related settings, and
change them as necessary.
In the Live screen, click the <Setup>
tab.
The Setup screen appears.
DEFAULT SETUP
To configure the video & audio
settings
You can set the video resolution, quality,
CODEC and audio input/output settings.
Select <Basic> - <Video & Audio>.
The Video & Audio setup screen appears.
Brightness : Adjust the screen
brightness from 1 to 100.
Contrast : Adjust the contrast from
1 to 100.
Resolution : Set the video size of the
MPEG4, H.264, and MPEG fi les.
NTSC : 4CIF(704x480),
VGA(640X480), CIF(352X240)
PAL : 4CIF(704x576),
VGA(640X480), CIF(352X288)
Quality : Adjust the picture quality
from 1 to 10.
Frame rate : Select one from 30 fps,
15 fps, 8 fps, 3 fps, and 1 fps.
Bitrate control* : Select CBR (Constant
Bit Rate) or VBR (Variable Bit Rate) for
the compression method.
If selecting VBR, you can not set the target
bit rate.
1.
2.
1.
y
y
y
-
-
y
y
y

setup screen