Why is there no image appearing on my Samsung SNB-6004?
If no image appears, and the transmission method is set to multicast, verify that the LAN the camera is connected to has a router that supports multicast.
Why is my Samsung Security Camera not detected in the IP installer program?
If your Samsung Security Camera isn't being detected by the IP installer program, try turning off the firewall settings on your PC and then search for the camera again.
General| Brand | Samsung |
|---|---|
| Model | SNB-6004 |
| Category | Security Camera |
| Language | English |
Essential safety guidelines for operating the apparatus to prevent hazards.
Steps to connect the camera directly to a local network via a PC.
Connecting the camera to a DSL/Cable modem using DHCP for internet access.
Steps for connecting the camera to a PPPoE modem with service ID and password.
Connecting the camera to a broadband router for home or small office networks.
Manual configuration of IP address, subnet mask, and gateway.
Automated network configuration using IP Installer for camera setup.
Configuration for dynamic IP environments, including DHCP server usage.
Configuring the broadband router to allow remote access to the camera.
Instructions for accessing the camera through a web browser using IP address.
Procedure for entering user ID and password to access the camera.
Procedure for installing the necessary plugin for real-time camera control.
Overview of the live video display interface and its controls.
How to search and play back recorded video data from storage.
Configuration options for video and audio settings, including profiles.
Setting video profile properties, connection policies, and individual properties.
Steps to add, modify, and configure video profiles with various parameters.
Adjusting video source, flip/mirror modes, analog output, and video type.
Defining specific areas within the video to be protected for privacy.
Configuring audio input sources, codecs, bitrate, gain, and output levels.
Adjusting image presets, sensor, SSDR, white balance, backlight, exposure, etc.
Creating and scheduling custom image presets for specific viewing conditions.
Adjusting brightness, shutter speed, anti-flicker, SSNR, lens, and AGC.
Adjusting brightness, shutter, SSNR, iris, and AGC for the SND-6083 camera.
Adjusting brightness, shutter, SSNR, iris, and AGC for the SND-6084 camera.
Configuring network interface settings, IP types, and IPv6.
Setting IP connection type (Manual, DHCP, PPPoE) and IPv6 options.
Configuring HTTP, HTTPS, RTSP, and other ports for camera access.
Configuring Dynamic Domain Name Service for remote access.
Configuring FTP/Email server settings for event image transfer.
Setting up FTP and Email servers for event notifications.
Activating recording, setting conditions, and managing data capacity.
Configuring storage actions, record profiles, and file formats for SD card recording.
Setting up NAS connection and saving operations for network storage.
Configuring alarm input types, activation times, and operation modes.
Configuring sensitivity and activation conditions to detect tampering attempts.
Setting up events for motion detection and intelligent video analysis.
Configuring sensitivity, size, and area for detecting motion.
Setting up video analysis types, rules, and detection overlays.
Configuring sensitivity, area, and activation for detecting faces.
Setting sound level, activation time, and conditions for detecting audio events.
Configuring alarm output types, modes, and duration for triggered events.
Managing product information, date, time, user accounts, and upgrades.
Managing administrator and guest accounts, and user permissions.
Performing system upgrades, factory resets, backups, and reboots.
Solutions for common problems encountered with camera operation and connectivity.
To Next Page
