Samsung SNB-7004 - Network Disconnection Event Setup

Network disconnection
You can receive and save events of a physically disconnected network.
1. From the Setup menu, select the
<Event (
)> tab.
2. Click <Event setup>.
3.
Select <Network disconnection> from
<Event action setup>.
4. Set whether or not to < Enable > .
5. Specify the activation time and
activation condition.
`
For more information about <Activation
time> and <Action>, refer to “Alarm input”.
(page
127
)
6. When done, click [Apply (
)].
English _139
● SETUP SCREEN