6.2. Camera Setting
107
COLOR : Output images are displayed in color all the time. Burst
signal size can be adjusted.
B/W : Output images are displayed in black and white all the time.
Burst signal can be kept or removed.
AUTO : Under day condition, the mode is automatically changed
into the COLOR mode to keep an optimum color. At night, the
mode is automatically changed into the B/W mode to distinguish
dark images clearly.
Note
If the AGC is in OFF mode, the Auto mode cannot
be used. Only COLOR or B/W mode can be used.
If the sunlight or halogen lamp is used in B/W mode,
the focus may be blurred compared with the general
illumination.
To Next Page
Loading...
