SNP-3300 30X PTZ Network Camera
108
6.2.7. Others
➊Sync
Internal Sync or Line Lock can be selected. Internal Sync is
selected by default. Line Sync function can adjust the output
phase of more than 1 unit without using sync signal generator.
When the AC Line Lock is selected, the phases can be adjusted
from 0 to 360 levels. Accordingly, the phase can be adjusted up to
360°.
Internal : Internal synchronization
Line Lock : Power line synchronization
Line Lock Phase : The phase of line sync can be selected from
0° to 360°. Initial value is 225°.
②Image Adj.
Brightness, sharpness and color density of the image signal can
be adjusted.
Tone : The overall brightness of the screen can be adjusted.
Sharpness : The overall sharpness of the image can be adjusted.
Color : The overall color density of the image can be adjusted.
➌Freeze
Moving image can be stopped and replayed.
ON: Image can be frozen.
OFF: Frozen image is released and the film is replayed.
To Next Page
Loading...
