3.3. Installation of SNP-3300
25
3.3. Installation of SNP-3300
Installation Precautions
y Check out the installation place. It should be strong enough to
support more than 4 times the total product weight including
30X PTZ Network Camera (SNP-3300) and installation
structure.
y Install the camera in a place having more than 500mm of space
above the ceiling board.
y Install the camera holder using the provided installation guide
tab, screw and fastening cable.
y There is a risk of camera falling during installation. Prevent the
fall using the fastening cable while installing the camera. Also,
access of other people to the place should not be allowed
during installation.
Accessories Sold Separately
Use the following accessories sold separately for convenient
installation
Ceiling Bracket(STB-330PC)
This mount is used to install the camera on the ceiling.
To Next Page
Loading...
