English _81
● SETUP SCREEN
To add the home position
1. Move to a desired start screen point and press [ ].
The point will be set to the home position.
2. Click [
] in the home position. You will move to the predetermined home position.
3. When the camera is rebooted after setting, the screen is located at the home
position. (If the camera was on another sequence operation, the sequence is
performed.)
To add a preset
1. Click on the [ ] button.
2. Select the preset number to be added.
3. Set the preset name and click on the [OK] button.
To delete a preset
1. Select the preset number to delete.
2. Press the [
] button.
To move to a desired preset
1. Click preset number you want to move in the preset settings.
To Next Page
Loading...
