setup screen
82_ setup screen
To configure the detailed settings for the preset
1. Select the number of preset that you
want to configure.
• After action : In the <After action>,
you can select auto execution/video
analysis operation after the preset
operation. (This setting does not
apply in the swing function.)
- Auto run : The sequence setting
for auto execution is performed. If
you turn off the function or if there
is no auto-executing operation, the
preset operation status is maintained. (This setting is not applied if preset is run
with a group or tour function.)
- Video analysis : MD/VA operation is run.
• Camera setup : You can change the camera setting to the environment of the
selected preset.
Refer to “Camera setup” for how to set the camera. (page 93)
• MD / VA : You can set the system to generate an event signal when a movement
is detected in the preset, or an intelligent video analysis event is detected.
For more details, refer to “MD / VA”. (Page 126)
2. When done, click [Apply (
)].
J
`
After saving the preset setting, make sure to select <Sequence Setup> or run the preset. If
the operation is not performed, the system may run a wrong operation, such as an unintended
change of preset setting.
`
While setting preset edit, you cannot use the functions, such as preset setting, home position
setting and move to the home position.
To Next Page
Loading...
