English _95
● SETUP SCREEN
BLC Setup
You can specify a desired area on the video manually and set the area to be displayed
more clearly.
1. Select <Back light>.
2. Set <Mode> to <BLC>.
If you select BLC, the Box adjustment
screen and the BLC box step are
displayed on the PTZ Control screen.
3. Select each item and set it properly.
• BLC level : You can change the
level to adjust the brightness of the
monitoring area.
• BLC box Mode : Specify the mode of
BLC box.
• Box adjustment : Use the arrow buttons to adjust the size and position of the BLC
Box.
• BLC box Step : Specify the pixel unit for movement. You can use the arrow
buttons of <Box adjustment> to add or reduce the pixels.
To Next Page
Loading...
