Need help?Do you have a question about the Samsung SNV-5080R and is the answer not in the manual?
General| Model | SNV-5080R |
|---|---|
| Type | Network Camera |
| Night Vision | Yes |
| Day & Night | Yes (ICR) |
| Video Compression | H.264, MJPEG |
| Ingress Protection | IP66 |
| Weather Resistance | Yes |
| Signal to Noise Ratio | 50dB |
| Wide Dynamic Range | DWDR |
| Frame Rate | 30fps @ 1080p |
| Ethernet | 10/100 Base-T |
| Power Supply | PoE (IEEE 802.3af), 12V DC |
| Operating Temperature | -10°C ~ +50°C |
Essential safety precautions for apparatus installation and usage.
Key warnings and cautions regarding product use and potential hazards.
Step-by-step instructions for installing the network camera.
Steps to connect the camera to a local network and access it from a PC.
Procedure for connecting the camera to a DHCP-enabled DSL or cable modem.
Procedure for connecting the camera to a PPPoE modem for internet access.
Setting up the camera with a broadband router for network access.
Manual configuration of static IP addresses, subnet mask, and gateway for the camera.
Details on setting up and checking dynamic IP addresses for the camera via DHCP.
How to configure port forwarding on a router for remote access to the camera.
How to access and connect to the camera using a web browser.
Steps to log in to the web viewer using default administrator credentials.
Configuring video and audio settings, including profiles, resolution, and quality.
Setting up network interface, IP address, subnet mask, and IPv6.
Configuring HTTP, device, RTSP, and streaming ports for network access.
Configuring DDNS for remote access using a hostname.
Configuring event-related settings including FTP/Email, storage, and alarms.
Configuring system settings like product info, date/time, user accounts, and upgrades.
Solutions for common problems encountered during operation and setup.
To Next Page