Samsung SNV-7080 - Page 53

English _53
● SETUP SCREEN
OSD Setup
Select <OSD>.
Select each item and set it properly.
Camera title : Use alphanumeric
characters in the list and enter a
desired title in the bottom input line.
You can enter up to 15 characters for the
title.
Camera title position x, y : Specify the coordinates where the camera title is
displayed.
Time OSD Setup
Select <Time OSD>.
Select each item and set it properly.
Time display : Specify the use of time
display.
Date format : Specify the date format
that will be displayed on the screen.
Time position display X, Y : Specify the position of time.
Smart codec setup
Set a desired area of the video incoming from the camera as ROI area and specify the
detection sensitivity for the area.
From the Setup menu, select the
<Audio & Video (
)> tab.
Click <Smart codec setup>.
Select ROI Area.
Face Detection : Active if a face is
recognized on the monitoring screen.
Face detection can be worked when
the following conditions are satisfied:
Face Direction : R/L ±45 upward
Rotation Angle of Face : Length ±30, Width ±60
Minimum Size of Face : Larger than 20×20, based on the resolution of 320×240
Manual : Specify the ROI area to monitor manually.
1.
2.
•

•
1.
2.
•
•
•
1.
2.
3.
•
M

-
-
-
•