setup screen
54_ setup screen
Select a quality and detection sensitivity for the ROI area.
If manually specifying the ROI area, select a desired area with the mouse pointer and
drag it as much as you want.
You can specify up to 5 distinct areas.
To cancel your selection, simply click [
].
When done, click [Apply (
)].
The Smart codec will not be active if it is set to <Off> in <Video profile>. (page
45)
Focus setup
You can adjust the Zoom magnification and Focus of the video.
Select the <Audio & Video (
)> tab
from Setup menu.
Click <Focus setup>.
Set the Zoom and Focus.
Zoom / Focus : Adjust the Zoom
magnification and Focus manually.
Auto Focus : Automatically adjust
Focus of the video.
When done, click [Apply
( )
].
The focus may not fit correctly in the
following cases:
A change to the object in AF mode (sudden movement, appearance or disappearance)
A sudden change to the illumination while in AF mode
Image of a low contrast
When the camera is exposed to a strong light source in the front or surroundings
If the lens is covered with impurities
In a situation where AF is hardly applied, try to make recording with a high contrast object or
use the MF (manual focus) mode.
4.
5.
6.
7.
J
1.
2.
3.
•
•
4.
J
-
-
-
-
-
-
To Next Page
Loading...
