Samsung SNV-7080R - Audio Setup; Camera Setup

setup screen
50_ setup screen
3. Provide a name and press [OK].
4. If you want to delete an area, select that area in the list and press [Delete
(
)].
5. When done, click [Apply (
)].
Audio setup
You can configure the I/O settings of the audio source from the camera.
1. From the Setup menu, select the
<Audio & Video (
)> tab.
2. Click <Audio setup>.
3. Adjust the audio I/O levels to your
preference.
• Audio-In : You can set the use of
audio input and specify the input
value.
• Audio-Out : You can set the use of
audio output and specify the output
value.
4. When done, click [Apply (
)].
Camera setup
You can change the camera settings according to the environment where the camera is
located.
1. From the Setup menu, select the
<Audio & Video (
)> tab.
2. Click <Camera setup>.
3. Configure the settings as necessary
of : SSDR, White balance, Backlight,
Exposure, Special, OSD, Time OSD
, IR
Mode
4. When done, click [Apply ( )].

If a certain time (timeout: 240s) is elapsed with
your not pressing the [Apply (
)] button
after changing the settings, your changes will
not be applied.