setup screen
68_ setup screen
J
If you are controlling the Pan/Tilt/Zoom operation or fitting the focus of the camera, the motion
sensor may not work.
If camera is capturing a close object, the motion detection capability may degrade. In the following
case, Motion detection function which is initially set may be worked abnormally.
-
The object color or brightness is similar to the background.
-
Multiple movements continue occurring at random due to a scene change or other reasons.
-
A fixed object continues moving in the same position.
-
An object hides other objects behind.
-
Too fast object.
-
Reflection / blur / shadow due to a strong light such as direct sunlight, illumination, or
headlamp.
-
In severe snow, rain, wind or in dawn / dusk.
Time schedule
You can configure so that an event will occur at a scheduled time regardless of the actual
occurrence of the event.
1. From the Setup menu, select the
<Event (
)> tab.
2. Click <Time schedule>.
To set the timer event
1. Set <Timer event setup> to <Enable>.
2. Specify the <Activation time>.
• Always : Always activates in operated
mode at the set interval.
• Only scheduled time : Periodically
activates in operated mode at a
specified time and date.
3. Specify the <Transfer interval>.
4. Specify the activation conditions.
• FTP sending : Specify the use of the FTP transfer if an event occurs.
• Record : Specify the use of recording if an event occurs.
5. When done, click [Apply (
)].
To Next Page
Loading...
