setup screen
76_ setup screen
5. Click [OK].
To cancel the specified area, right-click on the area and select [Delete] in the context
menu.
6. When done, click [Apply (
)].
To use the IV analysis function according to the whole area based rule
1. Set <IV analysis function> to
<Enable>.
2. If you set the event rule to <Entire
area based rules>, this will display the
popup window.
3. Select a desired <Entire Area Based
Rules>.
• Appearing/Disappearing : Detects
events of appearing and disappearing objects in the entire screen area selected
by the user.
• Scene Change : An event where the screen is changed at more than a certain
time interval will be detected.
`
You can set the <Scene Change> rule along with rules : <Appearing / Disappearing>.
4. Click [OK].
5. When done, click [Apply
( )
].
To Next Page
Loading...
