English _77
● SETUP SCREEN
Time schedule
You can set to save the video data at a certain interval as scheduled regardless of the
actual occurrence of the event.
1. From the Setup menu, select the
<Event (
)> tab.
2. Click <Time schedule>.
3. Set <Timer event setup> to <Enable>.
4. Specify the <Activation time>.
• Always : The set operation is always
executed.
• Only scheduled time : The set
operation is executed periodically,
only at the specified time on the
specified day of the week.
5. Specify the <Transfer interval>.
6. Specify the activation conditions.
• FTP sending : This sets the option to transfer by using FTP when an alarm is
input.
`
Refer to “FTP / E-mail” for more details. (page 68)
• Record : This sets the option to record the content in the Micro SD memory card
when the alarm is input.
`
Set <Record> to <On> in <SD record>. (page 69)
7. When done, click [Apply (
)].
To Next Page
Loading...
