Samsung SPU-3750T User Manual (English)

Other manuals for Samsung SPU-3750T

Questions and Answers:

M
markfieldsSep 6, 2025
Why is auto tracking malfunctioning on my Samsung SPU-3750T?
- K
  Kyle DuranSep 6, 2025
  If Auto Tracking suddenly functions incorrectly on your Samsung Security Camera, check for environmental factors like trees, grass, flags, or reflective surfaces being moved by wind or water. If present, set Area Masking for those areas. The camera's sensitivity may also be too high; adjust it to a lower setting. Additionally, check if it is raining or snowing, as this can interfere with Auto Tracking.
M
Melissa ScottSep 5, 2025
Why isn’t auto tracking working on my Samsung Security Camera?
- M
  Michael SmithSep 5, 2025
  If auto tracking isn't working on your Samsung Security Camera even when the subject is moving, check if the subject is in an area set for Area Masking. Also, verify the Auto Release settings. If sensitivity is too low, adjust it to a higher setting. Finally, ensure the subject isn't too small; adjust the picture angle to increase the subject size.
D
douglaschristopherSep 4, 2025
Why does my Samsung Security Camera turn on or move by itself?
- V
  vincenthenrySep 4, 2025
  If your Samsung Security Camera suddenly turns on or moves to a preset position by itself, check the Auto Run settings. Auto Run puts a camera through a predefined action sequence if the user does not use the Controller to operate the camera for a certain period of time. Also, check the Auto Refresh settings. Auto Refresh optimizes the camera's circuitry and components according to a predefined schedule.
R
Robert TurnerAug 23, 2025
How to fix Samsung SPU-3750T Security Camera controller that is not working?
- M
  mistybowmanAug 23, 2025
  If your Samsung Security Camera's controller is not working, ensure that the camera and peripheral devices are properly connected. Also, verify the setups of ID, protocol, and baud rates.
B
Brian JohnsonSep 2, 2025
Why don't pan, tilt, zoom, and focus work on my Samsung Security Camera?
- R
  Robert ShafferSep 3, 2025
  If the pan, tilt, zoom, and/or focus functions do not work on your Samsung Security Camera, check if the power cable is securely connected to the camera and the monitor, and ensure the video cable is properly connected. Also, check if Pan Limit and/or Tilt Limit are set; if so, remove the limits.
J
jefferywrightSep 2, 2025
Why does my Samsung SPU-3750T Security Camera switch between color and B&W frequently?
- S
  Sarah RodriguezSep 2, 2025
  If your Samsung Security Camera switches between color and B&W modes frequently, adjust the Duration and Dwell Time in the Day & Night menu.
T
tiffany43Sep 1, 2025
How to fix afterimages on my Samsung SPU-3750T Security Camera?
- J
  jason64Sep 1, 2025
  If afterimages appear in the picture of your Samsung Security Camera, check the Sens-Up settings.
E
Elizabeth SteinAug 31, 2025
Why does my Samsung SPU-3750T monitor display a white image?
- J
  Jamie PowersAug 31, 2025
  If the monitor displays a white image when using your Samsung Security Camera, check if the iris of the lens is open and adjust the menu for the iris of the lens.
J
Jesus KerrAug 30, 2025
What to do if my Samsung SPU-3750T controller does not work?
- M
  Mikayla AndersonAug 30, 2025
  If the controller for your Samsung Security Camera does not work, check if the camera and peripheral devices are properly connected. Also, verify the setups of ID, protocol, and baud rates.
J
Joseph DavisAug 29, 2025
Why is my Samsung SPU-3750T Security Camera flickering?
- M
  mfosterAug 29, 2025
  If the picture from your Samsung Security Camera is flickering, check if the camera is pointing directly at a fluorescent light or sunlight. If it is, change the camera's direction to remove the flickering.

Samsung SPU-3750T Specifications

General

Effective Pixels	768(H) x 494(V)
Lens	3.6x V/F (f=3.8 ~ 10mm)
Power Consumption	Max. 12W
Power Supply	DC 12V ±10%
Image Sensor	1/3" CCD
Back Light Compensation	Yes
Digital Noise Reduction	Yes
Privacy Masking	Off / On
White Balance	Auto / Manual
Operating Temperature	-10°C ~ +50°C (+14°F ~ +122°F)
Type	Dome Camera
Sensor	1/3" Interline Transfer CCD
Signal to Noise Ratio	50dB
Video Output	1.0 Vp-p Composite (75Ω/BNC)