Need help?Do you have a question about the Samsung SPD-2700 and is the answer not in the manual?
General| Camera Type | Dome |
|---|---|
| Lens | 3.6mm Fixed |
| Day/Night | Yes |
| Weatherproof | IP66 |
| Power Supply | 12VDC |
| Image Sensor | 1/3" CCD |
| Operating Temperature | -10°C to +50°C |
Details specific warning, caution, and special mark messages for safe product use.
Guidelines for environmentally safe recycling and disposal of the product.
Details of the camera's wiring interface board and its connections.
Illustrates wiring connections for the camera with DVR and controllers.
Configuration settings for communication protocols via SW2 DIP switches.
Selection of communication methods for the camera.
Settings for camera response to communication signals.
Configuration settings for camera identification via SW1 DIP switches.
Settings for the data transfer speed of communication protocols.
Settings to prevent signal attenuation in communication loops.
Settings for backing up camera presets and sequence information.
A chart detailing camera ID settings based on DIP switch configurations.
Illustrates camera wiring with controllers and monitors.
Illustrates camera wiring with receivers and DVRs.
Step-by-step guide for installing the camera using an on-ceiling mount.
Instructions for setting up DIP switches for communication and ID protocols.
Guide on connecting the safety cable and securely attaching the camera.
Explains symbols for motion detection and alarm input/output status.
Explains symbols related to PTZ functions and preset number displays.
Details on using the OSD menu, commands, and dome cover settings.
Explains camera operation via joystick for Pan/Tilt, Zoom, and menu access.
Main menu for configuring camera parameters.
Settings for automated camera actions and sequences.
Settings for Pan/Tilt movement and limits.
Settings for On-Screen Display elements.
Configuration for alarm inputs and outputs.
Options for resetting camera settings to default or factory states.
Displays current camera status and version information.
Main menu for configuring camera parameters.
Adjusting camera focus and digital zoom levels.
Adjusting screen colors for different lighting conditions.
Controlling camera exposure settings like brightness and shutter.
Settings for compensating bright backlight conditions.
Automatic Gain Control settings for low-light conditions.
Reduces noise in low-light images.
Functionality to switch between color and B/W modes based on lighting.
Miscellaneous camera settings not covered elsewhere.
Settings for camera behavior after power interruption and motion detection dwell time.
Functions for saving, recalling, and managing preset camera positions.
Setting up camera movement between two selected locations.
Recalling multiple preset locations in a consecutive group.
Recalling groups of preset locations in a consecutive manner.
Memorizing and replaying manual Pan, Tilt, Zoom, and Focus movements.
Automatically executing sequence operations after a period of inactivity.
Limiting the camera's Pan and Tilt movement ranges.
Selecting specific screen areas for OSD display during PTZ movement.
Selectively excluding private areas from monitoring.
Automatically adjusting Pan/Tilt speed based on zoom power.
Digitally flipping the image to maintain orientation when the camera moves past 100 degrees tilt.
Freezing the camera feed during preset transitions to reduce visual fatigue.
Automatically tracking a moving object on screen using camera functions.
Advanced Auto Track settings including zone operations.
Settings for displaying various information on the screen.
Configuring alarm input methods and priorities.
Configuring camera actions based on alarm events.
Operating peripheral devices like lamps and sirens via the camera.
Options for resetting camera settings to default or factory states.
Displays current camera status and version information.
To Next Page
