Samsung SPD-2700 - Functional Description; Camera Setting; Focus and Zoom

SPEED DOME CAMERA User’s Manual
36
SPEED DOME CAMERA User’s Manual
37
Operating Your Camera Functional Description
④OSD
Setting
④Preset
Name
①On/Off
②Edit Off
⑤Sequence
Status
On/Off On
⑥AreaName On/Off Off
⑦PTZ
Position
On/Off On
⑧Language English/Chinese/Fran
ç
ais/Deutsch/Espa
ñ
ol/Italiano English
⑤Alarm
Setting
①Alarm
Enable
On/Off Off
②AlarmInput
①In1
MOD:NC/NO/OFF
Priority:1~4
SEQ:Preset/Swing/Group/Tour/
A.Pan/Trace/Off
Off
②In2
③In3
④In4
③Alarm
Output
Out1~2 1~4,MD,TRK
Time1~2
Off/On/Momentary Off
DwellTime
1~60(Sec),
1~60(Min),
1~60(Hour)
④Aux.Output
①On/Off On/Off Off
②Time 1~60(Sec),1~60(Min)
⑥Initialize
①PowerOn
Reset
Cancel/Execute
②Factory
DefaultSet
Cancel/Execute
③Camera
DefaultSet
Cancel/Execute
④Auto
Refresh
Off,1~7Days Off
⑤AutoTrack
Default
Cancel/Execute
⑦Status
Camera Setting
①Focus & Zoom
White Balance ATW
③Exposure
④Back Light
AGC Medium
SSNR Medium
⑦Day & Night
⑧Others
Focus & Zoom
Focus Mode ONE SHOT AF
②Zoom Tracking
③Digital Zoom OFF
Main Menu
①Camera Setting
②Sequence Setting
③P/T Setting
④OSD Setting
⑤Alarm Setting
⑥Initialize
Status
➡
➡
Focus Mode :
- Auto : Performs continuous auto-focus.
- Manual : Changes the camera mode to Manual Focus.
- One Shot AF : Auto-focuses the camera once after the
Pan, Tilt, or Zoom function is used.
Digital Zoom :
Enables the maximum digital zoom.
Setting the digital zoom to 12X provides a total zoom of
444x(SPD-3700T/3700)/396x(SPD-3310)/324x(SPD-2700).
1. Focus and Zoom Settings
1.1 Focus Mode and Digital Zoom Setting Menu
 ▶
Main Menu/Camera Setting/Focus & Zoom
•Unliketheopticalzoom, the graphicsqualityofthe
digital zoom decreases as its zoom power increases.
•Theauto-focusfunctionmay notoperatenormally
under the following conditions :
- When background illumination is low
- While Slow-Shutter is in operation
- If the zoom level is set too high
- When background illumination is too high
- If a long distance object and a close distance object
appear together within a monitoring area
- If there is no contrast, e.g. the sky or a wall
- If the camera is facing a thin horizontal line
•AutoFocusfocusesonanobjectinthecenterofthe
screen; objects around the screen edges may not be
properly in focus.
Notes
Camera Setting