Samsung SPD-2700 - Exposure; Backlight

SPEED DOME CAMERA User’s Manual
40
SPEED DOME CAMERA User’s Manual
41
Camera Setting
①Focus & Zoom
White Balance ATW
③Exposure
④Back Light OFF
AGC Medium
SSNR Medium
⑦Day & Night
⑧Others
Main Menu
①Camera Setting
②Sequence Setting
③P/T Setting
④OSD Setting
⑤Alarm Setting
⑥Initialize
Status
➡
➡
Exposure
Brightness 050
Iris AUTO
Shutter ---
Sens-Up AUTO
3. Exposure
 ▶
Main Menu/Camera Setting/Exposure
The Exposure settings are to control the camera’s exposure
meter.
Brightness : Adjusts the screen brightness.
(Over 50: Brighter, Under 50: Darker)
Iris :
- Auto : Automatically adjusts the exposure meter.
- Manual : Enables manual adjustment of the exposure
meter. (Over 50: Brighter, Under 50: Darker)
Shutter : Controls the camera’s electronic shutter.
- --- : The shutter speed is fixed at 1/60 for NTSC and 1/50
for PAL. Operates when Iris is on the Auto Mode.
- ESC : Adjusts the shutter speed automatically according
to the screen brightness. Operates when Iris is on
the Manual Mode.
- A.FLK : Select this setting when you experience picture
flickering. Flickering can happen when artificial
lighting frequencies clash with camera frame rates.
- Manual : Enables manual adjustment of the shutter speed.
Sens-Up :
- Auto : Automatically detects light levels and maintains a
clear picture at night or under low-light conditions.
- Sens-Up Limit : Adjusts to the maximum-powered zoom
per frame.
•Foroptimalperformance oftheA.FLKmode, avoid
using the mode in conjunction with Backlight.
•WhiletheInternalSyncmodeisineffect,settingthe
shutter to '---' and facing the camera directly to a
bright light source may cause poor camera
performance.
•Sens-UpisdisabledwhentheshutterisinManualor
A.FLKmode.
Notes
Camera Setting
①Focus & Zoom
White Balance ATW
③Exposure
④Back Light OFF
AGC Medium
SSNR Medium
⑦Day & Night
⑧Others
Main Menu
①Camera Setting
②Sequence Setting
③P/T Setting
④OSD Setting
⑤Alarm Setting
⑥Initialize
Status
➡
4. Backlight
4.1 Backlight Mode Settings
 ▶
Main Menu/Camera Setting/Back Light
Unlike other cameras, Samsung Techwin’s unique SV-IV DSP
chip gives you a clear image of the subject even with bright
backlight.
Back Light Mode
:
- Off : Disables the Backlight mode.
- HLC : Activates the High Light Compensation mode.
- User : Activates a user defined backlight compensation
mode.
Functional Description Functional Description