Why are the colors not good on my Samsung SPU-3750T?
If the picture's colors are not displaying correctly on your Samsung Security Camera, check the White Balance settings. You can also try adjusting the Color Menu in Image Adj. Also, inspect the dome cover and camera lens for dirt or smudges, and clean them if necessary.
Why does my Samsung SPU-3750T Security Camera have digital noise in the picture?
If digital noise appears in the picture of your Samsung Security Camera, ensure the video cable is properly connected. Also, make sure that the power and video cables do not exceed the recommended maximum lengths. You can also adjust the sharpness level.
How to fix a Samsung SPU-3750T picture that is too dark or bright?
If the picture from your Samsung Security Camera is too dark or too bright, you should check the camera's Brightness menu and adjust the brightness settings accordingly.
What to do if my Samsung Security Camera picture is out of focus?
If the picture from your Samsung Security Camera is out of focus: * Check if the dome cover or camera lens is dirty; if so, clean it. * Verify the distance between the camera, the subject, and the surroundings, noting that the camera might struggle to focus on a subject against a white background. * If auto-focus is failing, switch to manual focus and adjust it yourself. * Restore the camera settings to default using the reset menu. * Adjust the sharpness level.
Why is the screen black on my Samsung SPU-3750T?
If you can’t see the screen and it appears black on your Samsung Security Camera, it may be due to the camera’s internal temperature dropping to -20 or lower, which can prevent video signal transmission. This does not indicate breakage; the camera will reset itself and display video again once its internal temperature reaches -20 or higher.
Why is there no picture displayed on my Samsung SPU-3750T?
If no picture is displayed on the monitor, verify that the power cable is securely connected to both the camera and the monitor, and that the video cable is properly connected. Also, check if the iris of the lens is closed and adjust the iris settings if needed. Additionally, examine the camera's fixed shutter speed and adjust the shutter menu.
General| Effective Pixels | 768(H) x 494(V) |
|---|---|
| Lens | 3.6x V/F (f=3.8 ~ 10mm) |
| Power Consumption | Max. 12W |
| Power Supply | DC 12V ±10% |
| Image Sensor | 1/3" CCD |
| Back Light Compensation | Yes |
| Digital Noise Reduction | Yes |
| Privacy Masking | Off / On |
| White Balance | Auto / Manual |
| Operating Temperature | -10°C ~ +50°C (+14°F ~ +122°F) |
| Type | Dome Camera |
| Sensor | 1/3" Interline Transfer CCD |
| Signal to Noise Ratio | 50dB |
| Video Output | 1.0 Vp-p Composite (75Ω/BNC) |
To Next Page
