Samsung SRD-1630 - User Manual

132 pages

To Next Page

To Next Page

Loading...

8 CHANNEL/

16 CHANNEL DVR

User Manual

SRD-830/830D/830DC/

850/850D/850DC/870/870D/870DC/

1610/1610D/1610DC/1630/1630D/1630DC/

1650/1650D/1650DC/1670/1670D/1670DC

Table of Contents

Other manuals for Samsung SRD-1630

Quick Guide16 pages

Specifications2 pages

Questions and Answers:

C
Colton RamirezSep 2, 2025
Why is my Samsung SRD-1630 DVR recording not working?
- E
  estoneSep 2, 2025
  If your Samsung DVR is not recording, first, make sure you see an image on the screen. If you do, check your recording settings. To manually record, press the [REC] button on the front panel of the DVR or on the remote control. To schedule recording, specify a desired time in Menu – Record - Recording Schedule. There are different recording options: Continuous (recording proceeds in any conditions at the specified time), Event (recording performs only if the event is of alarm, motion detection and video loss), Continuous / Event (if there is no event found, continuous recording will perform. If an event occurs, event recording will perform).
C
Chad BallSep 1, 2025
Why does my Samsung DVR say 'Need to reset date/time'?
- V
  Valerie Cordova DDSSep 1, 2025
  If your Samsung DVR displays a message saying “Need to reset date/time,” it means there's an issue with the internal clock's time setting or the clock itself. In this case, it is recommended to contact the retailer or a service center for further assistance.
F
frankthomasAug 31, 2025
Why can't I move the cursor to the Start button on my Samsung DVR calendar search?
- T
  Teresa ReeseAug 31, 2025
  If the cursor will not move to the Start button when you start the calendar search on your Samsung DVR, check if the channel and the date that you want to play are marked with the V symbol. Both channel and date should be checked before you can start playing with the Start button.
G
Gabriel VegaAug 30, 2025
Why won't my Samsung SRD-1630 start recording when I press the REC button?
- M
  Michelle DavisAug 30, 2025
  If the REC indicator does not flash, nor does the player start recording when you press the [REC] button on the front panel of your Samsung DVR, check if there is a free space on the HDD for the recording and if the record mode is set to ON in the record mode setting.
R
Robert PenaAug 29, 2025
How to fix Samsung SRD-1630 DVR not recognizing external SATA HDD?
- A
  Amy DavisAug 29, 2025
  See the compatibility list of external storage devices to check if the connected device is supported by the Samsung DVR. For the compatibility list, contact the retailer where you purchased the DVR.
S
Stephen Berger IVAug 28, 2025
How to fix Samsung SRD-1630 DVR not recognizing additional HDD?
- K
  Kevin GarciaAug 28, 2025
  See the compatibility list to check if the additional HDD is supported by the Samsung DVR. For the compatibility list, contact the retailer where you purchased the DVR.
C
Craig FlowersAug 27, 2025
What to do if my Samsung SRD-1630 DVR system does not turn on?
- P
  Patricia JuarezAug 27, 2025
  If your Samsung DVR system does not turn on, check if the power supply system is properly connected. Also, check the system for the input voltage from the power source. If the problem persists even after you have taken the above actions, check the power supplier and replace it with a new one if necessary.
A
Angela SmithAug 27, 2025
Why does my Samsung DVR display a black screen on some channels?
- M
  Meghan VazquezAug 27, 2025
  If some channels on your Samsung DVR display a black screen even if they receive video sources, first check if the camera connected to the system properly displays the image and if the camera is properly supplied with power. Sometimes, this problem may occur on a channel with weak video signal from a video distributor that is connected to multiple systems. In this case, input the video source of the camera directly into the DVR.
J
Jenna DavisAug 25, 2025
What to do if my Samsung DVR does not recognize all installed disks?
- J
  John ReedAug 26, 2025
  If your Samsung DVR does not recognize all the installed disks, it may simply need more time to recognize multiple external HDDs, so try again in a moment. If the problem persists, it may occur due to a mechanical error of the HDD installed, so try again with a different HDD.
S
Stephanie WeaverAug 25, 2025
What to do if my Samsung SRD-1630 displays 'NO HDD' icon?
- N
  Natasha HullAug 25, 2025
  If your Samsung DVR displays the “NO HDD” icon and an error message, check the HDD for connection. If the problem persists in a normal condition, contact the nearest service center to have the HDD checked by the service personnel.

Samsung SRD-1630 Specifications

General

Model	SRD-1630
Video Input Channels	16
Compression Format	H.264
Operating System	Embedded Linux
Ethernet	Yes
Video Output	HDMI
Network Interface	10/100 Ethernet
Power Supply	100-240V AC, 50/60Hz
Max. Recording Rate	120fps
Audio Inputs/Outputs	4 inputs / 1 output
USB	2 USB ports
Remote Viewing	Yes

Related product manuals

Preview: Samsung SRD-1630D

Samsung SRD-1630D

Samsung SRD-1610

Preview: Samsung SRD-1642

Samsung SRD-1642

Samsung SRD-1653D

Samsung SRD-1650D

Preview: Samsung SRD-1654D

Samsung SRD-1654D

Preview: Samsung SRD-1652D

Samsung SRD-1652D

Samsung SRD-1673D

Preview: Samsung SRD-1656D

Samsung SRD-1656D

Preview: Samsung SRD-1680D

Samsung SRD-1680D

Samsung SRD-1670D

Samsung SRD-1670DC