What to do if my Samsung SRD-476D DVR does not turn on?
If your Samsung DVR doesn't turn on, start by checking if the power supply is properly connected. Next, verify the system is receiving the correct input voltage from the power source. If the problem continues after these checks, the power supplier might be faulty and need replacement.
What to do if my Samsung SRD-476D DVR displays the “NO HDD” icon?
If your Samsung DVR displays the “NO HDD” icon and an error message, first check the HDD connection. If the problem persists, it is recommended to contact the nearest service center to have the HDD checked by service personnel.
Why does my Samsung SRD-476D DVR display only a black screen on some channels?
If some channels on your Samsung DVR display only a black screen, first check if the camera connected to the system properly displays the image. Also, check if the camera is properly supplied with power. If these are fine, input the video source of the camera directly into the DVR.
What to do if Samsung DVR backup data is not played by the PC or DVR?
When backing up data on your Samsung DVR, you must select the appropriate player: PC or DVR. If using a PC to play the data, ensure the backup file format is SEC. If using the DVR, formatting backup files should be done by the DVR.
What to do if the channel button does not work on the Samsung DVR Live screen?
If the Channel button on your Samsung DVR Live screen isn't working, and you are in the event monitoring screen, press the [ALARM] button to exit the screen and then select a channel.
How to fix a Samsung SRD-476D that does not recognize installed HDDs?
If your Samsung DVR doesn't recognize all installed HDDs, try again in a moment. If the problem persists, it may be due to a mechanical error of the installed HDD. Try again with a different HDD.
What to do if Samsung SRD-476D player does not switch to Live mode?
To switch your Samsung DVR player to Live mode, press the Stop [@] button on the DVR or the remote control, or click the [ ] icon on the launcher.
What to do if the Samsung SRD-476D DVR REC indicator does not flash when I press the REC button?
If the REC indicator on your Samsung DVR doesn't flash when you press the [REC] button, check if there is free space on the HDD for recording. Also, verify that the record mode is set to ON in the record mode setting.
What to do if Samsung DVR cursor will not move to the Start button when I start the calendar search?
If the cursor won't move to the Start button during a calendar search on your Samsung DVR, check if the channel and the date you want to play are marked with the V symbol.
How to fix Samsung DVR PTZ button not working?
If the [PTZ] button on the Live screen of your Samsung DVR isn't working, check if the current protocols and other settings in the PTZ device are properly configured according to the PTZ camera.
General| Video Output Channels | 1 |
|---|---|
| Recording Rate | 120 fps |
| Compression Format | H.264 |
| Audio Inputs | 4 |
| Audio Outputs | 1 |
| Internal HDD | Yes |
| Power Supply | 12V DC |
| Video Input Channels | 4 |
| Recording Resolution | CIF |
| Max. Resolution | 720x480 |
| USB | 2 USB ports |
| Network Interface | 10/100Mbps Ethernet |
To Next Page
