Samsung SRD-476D - Security Precautions

English _5
Network Connection
Port forwarding
1. Check the “Default Gateway” from the network properties of the
PC connected through the router.
2. From <Network> - <Connection Mode>, select <Connection>.
A window of connection mode setup appears.
3. Use direction buttons (
◄ ► ) to move to a desired item, and
set the value.
4. Enter the gateway address found in step 1 into the browser’s
address field to display the router settings.
5. Select the “Advanced” tab in the “Virtual Server” menu, enter the
IP address and port and click the <Apply> button.
M
 Above instructions are based on D-LINK DI-624 router. Port forwarding
setup may differ from the router’s manufacturer.
56
$/$50,1 $/$50287


'&9
1(7:25.
86%+'0,&2162/(6(5,$/9*$
&+ &+
&+ &+

*
&20
&201&12
12
$8',2,1
$8',2287 /223287
9,'(2,1
6327
6327
Broadband Modem
Remote PC
Internet
Broadband
Router or HUB
Local PC
Connection Mode
Interface
Port Alarm
x
IP Type Static
x
Transfer Bandwidth 2Mbps
OK Cancel
x
IP Address 192.168.1.200
x
Gateway 192.168.1.1
x
Subnet Mask 255.255.255.0
x
DNS
Manual 168.126.63.1