12_ overview
overview
PART NAMES AND FUNCTIONS (REAR)
Part Names Functions
AUDIO IN 1~4
Output ports (RCA jacks) for the audio signal.
b
VIDEO IN
Input port for the composite video signal.
Supports both NTSC and PAL video signal.
c
SPOT
BNC type of output port for the Spot signal.
DC 12V
Port to be connected to the 12V power source.
ALARM IN
1~4, G : Alarm input ports.
ALARM OUT
1, 2, COM : Alarm output ports.
RS485
Used to establish RS485 communications
.
USB
USB connection port.
NETWORK
Network connection port.
HDMI
HDMI connector port.
LOOP OUT
Terminal used to send the video signal to another device.
SERIAL
Serial port for connecting to a POS device.
AUDIO OUT
Output port (RCA jack) for the audio signal.
It is recommended to use an amplifier-integrated speaker for the output of the audio signal.
VGA
Output port for VGA video signal.
M
[CONSOLE] is designed for the service repair purpose only.
56
$/$50,1 $/$50287
'&9
1(7:25.
86%+'0,&2162/(6(5,$/9*$
&+ &+
&+ &+
*
&20
&201&12
12
$8',2,1
$8',2287 /223287
9,'(2,1
6327
6327
c
b
To Next Page
Loading...
