42_ menu setup
menu setup
To specify a motion area
1. Select a motion detection channel.
Only if you select a single channel, you can specify the motion detection area.
2. Move to <Area> and select <Select Area>.
3. Select <Custom Area>.
4. When the custom area setup window appears, use the direction buttons to move to a desired area and
press [ENTER].
The specified motion area will be boxed in grey.
5. When done, press [ESC] or right-click to return to the previous menu.
Preset Setting
You can control the preset specified in the PTZ function to react according to the event input.
MENU - ► - ► - ► - ENTER - ► - ► - ENTER
1. Specify a preset to use as a PTZ operation for each channel.
2. From the preset menu, select a channel and specify the event to trigger the preset.
You can select for the event: sensor, motion detection and text. You can specify up to 16 presets.
To Next Page
Loading...
