Why does the web viewer not show live video after registering a camera on my Samsung SRN-1673S DVR?
If you've registered a camera to your Samsung DVR but the web viewer doesn't show live video, you need to edit/save the desired layout after registering the camera. This allows the screen split mode and live screen fit settings to appear.
How to fix the screen that does not switch automatically in the web viewer of my Samsung SRN-1673S?
If the screen does not switch automatically in the web viewer of your Samsung DVR, you need to select the desired layout for sequence operation in the automatic switching menu.
Why is there no response controlling PTZ in the live viewer on my Samsung SRN-1673S?
If you experience no response when controlling PTZ (Pan, Tilt, Zoom) in the live viewer of your Samsung DVR, verify that the registered camera supports the PTZ function.
What does "Need to reset date/time" mean on my Samsung SRN-1673S?
If your Samsung DVR displays a "Need to reset date/time" message, it indicates an issue with the internal clock's time setting or an error in the clock itself. Contact the retailer or service center for assistance.
Why is the time bar not displayed in Search mode on my Samsung SRN-1673S?
If the time bar is not displayed in Search mode on your Samsung DVR, the timeline might be in extension mode. In extension mode, the time bar may not be visible in the current timeline. Switch to normal mode or use the left and right buttons to navigate through the time bar.
General| Model | SRN-1673S |
|---|---|
| Type | DVR |
| Channels | 16 |
| Operating System | Embedded Linux |
| Alarm Input/Output | 16 / 4 |
| USB | 2 x USB 2.0 |
| Video Outputs | 1 x HDMI, 1 x VGA |
| Video Input | 16 x BNC |
| Video Compression | H.264 |
| Audio Compression | G.711 |
| Recording Rate | 120fps |
| Ethernet | 1x RJ45 |
| Power Supply | 12V DC |
To Next Page
