Why does the recording screen slow down on my Samsung SRN-1673S?
If the recording screen slows down on your Samsung DVR, check if the recording specifications for each HDD condition (refer to the recording setting in the menu) are appropriate for the actual recording setting. If the data processing rate exceeds the play performance (refer to the product specifications in the menu), only the main video frames will play.
What to do if some channels on my Samsung SRN-1673S DVR show a black screen?
If your Samsung DVR displays a black screen on some channels despite receiving video sources, start by checking if the camera is properly supplied with power. Then, verify the video output by connecting to the camera's web viewer. Also, ensure the network port is correctly connected and the network settings are properly configured. As a last resort, try changing the hub to one that supports Gigabit.
Why is my Samsung SRN-1673S not recording when I press the REC button?
If your Samsung DVR isn't recording when you press the REC button, first check if there is available recording space on the HDD. Next, go to the menu and ensure that the recording mode is turned ON. Also, verify that the number of general recordings is not turned OFF in the menu.
Why does my Samsung SRN-1673S screen display the logo image repeatedly?
If your Samsung DVR displays the logo image repeatedly, it may indicate a problem with the main board or corrupted software. Contact the nearest service center for more information.
What to do if no video is played on the connected monitor with my Samsung SRN-1673S DVR?
If you are unable to view video on the connected monitor with your Samsung DVR, first check if the necessary cables are properly connected to the monitor. If the screen remains blank, use the remote control and press the [STOP (@)] ? [ZOOM] ? [STOP (@)] ? [ZOOM] ? [MENU] buttons to launch the basic resolution information window, where you can set the desired resolution. If the screen is still not displayed, wait until the basic resolution window appears, then try switching to another resolution before setting the final output resolution. Also, verify that the monitor resolution is supported by the NVR output (HDMI or VGA).
Why is recording not performed in accordance with the settings on my Samsung DVR?
If recording is not being performed in accordance with the settings on your Samsung DVR, and the recording status shows that the input data is exceeded, navigate to Menu – Recording – Recording Setting, and increase the max data capacity to a value greater than the input data.
Why is my external storage device not recognized on my Samsung SRN-1673S DVR?
If you've connected an external storage device (USB Memory, USB HDD) to your Samsung NVR and it's not being recognized, consult the compatibility list of external storage devices to ensure the connected device is supported by the NVR. Contact the retailer where you purchased the NVR for the compatibility list.
Why does the frame rate of the actual recording not match that of configured to the camera on my Samsung SRN-1673S?
If the frame rate of the actual recording on your Samsung DVR does not match the configured frame rate of the camera, it may be because multiple profiles were applied to one camera for video transmission, causing the camera to service the video stream at a lower frame rate than specified. Configure your camera to use one profile for data streaming if possible. For example, set the same profile for recording and network profiles to ensure the specified frame rate is used for recording. Note that the allowed limit bitrate for recording / recording settings should be set to be bigger values than that of camera's feed.
How to fix the screen that does not switch automatically in the web viewer of my Samsung SRN-1673S?
If the screen does not switch automatically in the web viewer of your Samsung DVR, you need to select the desired layout for sequence operation in the automatic switching menu.
Why won't the cursor move to the Start button on my Samsung SRN-1673S calendar search?
If the cursor won't move to the Start button when starting a calendar search on your Samsung DVR, ensure that both the channel and the date you want to play are marked with the V symbol. Both must be checked before you can use the Start button.
Identifies the specific models covered by this user manual, including SRN-473S, SRN-873S, and SRN-1673S.
Details warnings and cautions regarding battery usage, replacement, and disposal to prevent explosions or damage.
Details the icons and system status indicators visible on the NVR's live screen interface.
Explains how to configure and operate PTZ cameras connected to the NVR.
Covers system-wide configurations including Date/Time, Language, User, and System Properties.
Details how to set up scheduled, event, and other recording-related parameters.
Provides instructions for configuring the network environment for NVR connectivity.
Guides on setting up the internal DHCP server for assigning IP addresses to network cameras.
Offers important warnings and precautions for installing HDDs to prevent data loss or damage.
Explains the meaning of various icons displayed on the NVR's live viewing screen.
Describes how to change the screen display mode, including split screen options.
Provides a step-by-step guide on how to create and configure custom channel layouts.
Outlines the initial steps and methods for activating and operating PTZ cameras.
Instructions for setting up and saving specific camera positions as presets.
Configures system date, time, time zone, DST, and interface language settings.
Details on changing the administrator's ID and password for system access.
How to view system information, including software version and MAC address.
Check storage device status, capacity, usage, and format options.
Details on how to control Pan, Tilt, and Zoom functions of connected PTZ cameras.
General| Model | SRN-1673S |
|---|---|
| Type | DVR |
| Channels | 16 |
| Operating System | Embedded Linux |
| Alarm Input/Output | 16 / 4 |
| USB | 2 x USB 2.0 |
| Video Outputs | 1 x HDMI, 1 x VGA |
| Video Input | 16 x BNC |
| Video Compression | H.264 |
| Audio Compression | G.711 |
| Recording Rate | 120fps |
| Ethernet | 1x RJ45 |
| Power Supply | 12V DC |
To Next Page
