AUDIO ON/OFF
You can turn the sound on/off corresponding to the channel in Live mode.
AUDIO ON/OFF in Single mode
In the screen, click on the audio icon ( ) or in the remote control, press the [AUDIO] button to turn it on/off.
M
` If there is no audio output even if output is activated, check whether the connected network camera supports audio and
audio settings.
The sound icon can be displayed if the sound signal fails to output from noise.
` Only the channel where <AUDIO> is set to <ON> in "Setting the Device > Camera" displays the audio icon ( ) in Live
mode that you can use to turn the sound on/off.
FREEZE
This is available only in Live mode, this pauses playing the Live image temporarily.
1. Press the [FREEZE] button on your remote control or click <
> in launcher mode.
Video playing is paused.
2. Press the [FREEZE] button on your remote control or click <
> in launcher mode.
Pause is canceled. Playing is resumed.
To Next Page
Loading...
