English _81
● MENU SETUP
Live Setting
You can change the live transfer settings of the network camera.
[MENU] [ENTER] ▼ <Menu> [ENTER] ▼ <Device> ► <Camera> [ENTER] ▼►
<Live Setup> [ENTER] ▲▼◄► [ENTER]
•
Live Replacement : You can select the live profile setup mode.
If you select <Manual>, the profile setup items are enabled, and you can change settings manually.
-
Auto : For live monitoring, the profile which is approximate to the output resolution of each channel must be
selected automatically.
e.g., Camera profile : Three profiles (1280x720, 800x600 and 640x480) are supported.
If the resolution of the output screen is 1920x1080:
1280x720 is selected automatically if the channel resolution of the single channel is 1920x1080.
640x480 is selected automatically if the channel resolution of 16-split channel is 480x270.
-
Manual : Live monitoring is performed with the profile selected by the user from the registered camera
profiles.
-
Record : Live monitoring is performed with the profile set for recording.
•
Profile : You can select the video profile of the connected camera setting.
•
Codec : Show the codec of the selected recording profile.
•
Resolution : Show the resolution of the selected profile.
•
Frame Rate : Show the frame rate of the selected profile.
•
Quality : Show the quality of transfer video of the selected profile.
To Next Page
Loading...
