English _111
● SEARCH & PLAY
Text Search
You can search data that was entered into POS systems connected to NVR.
1. Select <Text Search> from the <Search> menu.
2. Use the up, down, left, and right (▲▼◄►) buttons to configure the search condition setup items, and press
the [ENTER] button.
` A deeper and more detailed search can be performed by using specific characters.
• Search characters : Enter characters using a virtual keyboard.
• Event Keyword : Search using a condition set in the "Device > Text > Event settings" menu. (Page 88)
• Search Condition : Enter a word to search in the input screen and press the <Search> button.
-
<Case Sensitive> : If this option is checked, the search terms are case-sensitive.
-
<Whole Word> : If checked, only results that exactly match the input words will be displayed.
• Time overlap : This is displayed if there is data duplicated during a preset time interval.
• Preview screen : If data is selected from a list, a preview image is displayed.
All information is displayed in the text display below.
• Export : Stores all text search information recored in NVR to storage media.
3. Select data and <Play>.
Moves to a replay screen for searched text data.
To Next Page
Loading...
