English _87
● MENU SETUP
Text
Device and events can be set up.
Device Settings
Relevant values of a device connected to NVR can be set.
[MENU] [ENTER] ▼ <Menu> [ENTER] ▼ <Device> ►▼ <Text> [ENTER] ▼
<Device> ▲▼◄► [ENTER]
• Device : Enter the user's desired name
• Use : Select whether or not to use
• CH : Select a channel to add a device from a channel table.
• Port : Display a port number that is set
• Encoding type : Select an encoding type to use from a list.
-
You can select starting and ending character strings.
M
` General characters, special characters, and Hex codes (e.g. 0x12, 0x34) can be used for character strings.
J
` Equipment connected to NVR uses TCP/IP communication protocol.
To Next Page
Loading...
