English _95
● MENU SETUP
Video Loss Detection
You can set the camera so that the camera can trigger the alarm if it is disconnected or the video is lost due to
unstable network connection.
[MENU] [ENTER] ▼ <Menu> [ENTER] ▼ <Event> ►▼ <Video Loss Detection>
[ENTER] ▲▼◄► [ENTER]
• Apply to CH : If you select <Apply to CH>, the "Apply to CH" confirmation window will appear.
After selecting channels that the settings will be applied to, click on <OK> to apply them to the selected
channels.
•
Video Loss State : Specify the use of video loss detection.
•
Alarm Out : Select an alarm output method.
` For further information on alarm output, refer to "HDD Alarm > Alarm". (Page 84)
` SRN-473S only supports <1> alarm, and SRN-873S only supports <1>, <2>, and <3> alarms.
•
Alarm Duration : Specify the duration of the alarm output with the beep.
To Next Page
Loading...
