Alarm Out Schedule
You can set the conditions and operating hours for scheduled alarms.
[MENU] [ENTER] ▼ <Menu> [ENTER] ▼ <Event> ►▼ <Alarm Out Schedule>
[ENTER] ▲▼◄► [ENTER]
•
Alarm Out : Sets the alarm output method.
` For further information on alarm output, refer to "HDD Alarm > Alarm". (Page 84)
-
<ON> : Marked in green, and always generates alarm on scheduled time.
-
<OFF> : Marked in black, no alarm is generated even if an event occurs.
-
<Event Sync> : Marked in orange, generates alarm only when an event occurs.
•
Apply to All Alarm out : Applies the configured schedule to all alarms.
M
` When the alarm is generated on the scheduled time, you can stop the alarm by canceling the schedule.
To Next Page
Loading...
