Setting screen switching
If you don't register the layout, the screen switching function will
not operate.
You can view the layouts one by one.
Click on the <
> button to launch the switching setting
window.
1. Push <
> sequentially and specify a layout to display in
order.
2. Enter the desired screen switching time.
3. Click on the <OK> button to save the designated sequence.
To perform switching
Click on the <Sequence> button to activate the switching mode
and run a sequence.
CAM 01 - TEXT 01
CAM 05 - TEXT 01
CAM 09 - TEXT 01
CAM 13 - TEXT 01
CAM 02 - TEXT 01
CAM 06 - TEXT 01
CAM 10 - TEXT 01
CAM 14 - TEXT 01
CAM 03 - TEXT 01
CAM 07 - TEXT 01
CAM 11 - TEXT 01
CAM 15 - TEXT 01
CAM 04 - TEXT 01
CAM 08 - TEXT 01
CAM 12 - TEXT 01
CAM 16 - TEXT 01
To Next Page
Loading...
