How to fix the screen that does not switch automatically in the web viewer of my Samsung SRN-1673S?
If the screen does not switch automatically in the web viewer of your Samsung DVR, you need to select the desired layout for sequence operation in the automatic switching menu.
How to fix a Samsung SRN-1673S that does not turn on?
If your Samsung DVR system isn't powering on and the front panel indicator is off, first ensure the power supply is correctly connected. Next, check the system's input voltage from the power source. If it still doesn't work, try replacing the power supplier. Finally, inspect the internal cables (SMPS, FRONT) to ensure they are properly connected.
Why won't the cursor move to the Start button on my Samsung SRN-1673S calendar search?
If the cursor won't move to the Start button when starting a calendar search on your Samsung DVR, ensure that both the channel and the date you want to play are marked with the V symbol. Both must be checked before you can use the Start button.
How to cancel an alarm on a Samsung SRN-1673S?
If you try to cancel an alarm by pressing the [ALARM] button on your Samsung DVR remote control, but the alarm continues, try pressing the [MENU] button on your remote control to cancel the alarm. Alternatively, you can cancel the alarm by turning off the event monitoring time in monitoring mode, muting the alarm output in event recording mode (for camera events/video loss), or turning off the mode in event recording mode (for camera events/video loss).
Why does the Channel button not work on the Live screen of my Samsung SRN-1673S DVR?
If you are in event monitoring mode on your Samsung DVR, the Channel button will not work. To exit the event monitoring screen, press the [ALARM] button, and then select a channel.
How to adjust the brightness of the Live screen on my Samsung SRN-1673S DVR?
If the Live screen on your Samsung DVR is too bright or too dark, check the video settings of the registered camera.
What to do if my Samsung SRN-1673S DVR camera is not connected?
If the camera or PC fails to connect to the Samsung DVR, verify that the network cable is properly connected. Ensure that you have configured the Network – Connection Mode. Check the IP settings of both the PC and the camera. Try running a Ping Test. Also, check for any other devices on the network using the same IP address.
What to do if no video is played on the connected monitor with my Samsung SRN-1673S DVR?
If you are unable to view video on the connected monitor with your Samsung DVR, first check if the necessary cables are properly connected to the monitor. If the screen remains blank, use the remote control and press the [STOP (@)] ? [ZOOM] ? [STOP (@)] ? [ZOOM] ? [MENU] buttons to launch the basic resolution information window, where you can set the desired resolution. If the screen is still not displayed, wait until the basic resolution window appears, then try switching to another resolution before setting the final output resolution. Also, verify that the monitor resolution is supported by the NVR output (HDMI or VGA).
Why does my Samsung SRN-1673S screen display the logo image repeatedly?
If your Samsung DVR displays the logo image repeatedly, it may indicate a problem with the main board or corrupted software. Contact the nearest service center for more information.
Why is my Samsung SRN-1673S not recording when I press the REC button?
If your Samsung DVR isn't recording when you press the REC button, first check if there is available recording space on the HDD. Next, go to the menu and ensure that the recording mode is turned ON. Also, verify that the number of general recordings is not turned OFF in the menu.
General| Model | SRN-1673S |
|---|---|
| Type | DVR |
| Channels | 16 |
| Operating System | Embedded Linux |
| Alarm Input/Output | 16 / 4 |
| USB | 2 x USB 2.0 |
| Video Outputs | 1 x HDMI, 1 x VGA |
| Video Input | 16 x BNC |
| Video Compression | H.264 |
| Audio Compression | G.711 |
| Recording Rate | 120fps |
| Ethernet | 1x RJ45 |
| Power Supply | 12V DC |
Identifies the specific models covered by this user manual, including SRN-473S, SRN-873S, and SRN-1673S.
Details warnings and cautions regarding battery usage, replacement, and disposal to prevent explosions or damage.
Details the icons and system status indicators visible on the NVR's live screen interface.
Explains how to configure and operate PTZ cameras connected to the NVR.
Covers system-wide configurations including Date/Time, Language, User, and System Properties.
Details how to set up scheduled, event, and other recording-related parameters.
Provides instructions for configuring the network environment for NVR connectivity.
Guides on setting up the internal DHCP server for assigning IP addresses to network cameras.
Offers important warnings and precautions for installing HDDs to prevent data loss or damage.
Explains the meaning of various icons displayed on the NVR's live viewing screen.
Describes how to change the screen display mode, including split screen options.
Provides a step-by-step guide on how to create and configure custom channel layouts.
Outlines the initial steps and methods for activating and operating PTZ cameras.
Instructions for setting up and saving specific camera positions as presets.
Configures system date, time, time zone, DST, and interface language settings.
Details on changing the administrator's ID and password for system access.
How to view system information, including software version and MAC address.
Check storage device status, capacity, usage, and format options.
Details on how to control Pan, Tilt, and Zoom functions of connected PTZ cameras.
To Next Page
