11. MTS You
can select the MTS (Multichannel Television Stereo)
mode.
Mono, Stereo, SAP (Separate Audio Program)
Set 'MTS' to ON to choose Mono, Stereo or SAP.
12.
MENU
Opens
the on-screen menu and exits from the menu or
closes the adjustment menu.
13.
SOURCE
Press the button to change the input signal SOURCE.
Changing
the SOURCE is only allowed for external devices
that are connected to the monitor at the time.
14. PRE-CH This button is used to return to the immediately previous
channel.
15.
CH In TV mode, selects TV channels.
16. MUTE
Pauses
(mutes) the audio output temporarily. This is dis-
played on the lower left corner of the screen. The audio
resumes if MUTE or - VOL + is pressed in the Mute mode.
17.
RETURN
Returns to the previous menu.
18.
ENTER
Activates a highlighted menu item.
19.
EXIT
Exits from the menu screen.
20. SRS
Not Available.
21. FAV.CH
Press to switch to your favorite channels.
22. P.SIZE Press to change the screen size.
Introduction
To Next Page
Loading...
