Samsung SyncMaster FX2490HD - Page 44

Using the Product 3-5
Picture Options • <Digital Noise Filter >
If the broadcast signal received by your TV is weak, you can activate the Digital Noise
Reduction feature to help reduce any static and ghosting that may appear on the screen.
- <Off> - <Low> - <Medium> - <High> - <Auto> - <Auto Visualisation>
Auto Visualisation: When changing analogue channels, displays the intensity of the current
signal and defines the screen noise filter. Only available for analogue channels.
• <MPEG Noise Filter>
Reduces MPEG noise to provide improved picture quality.
- <Off> - <Low> - <Medium> - <High> - <Auto>
• <HDMI Black Level>
Selects the black level on the screen to adjust the screen depth.
- <Normal> - <Low>
Available only in <HDMI> mode.
• <Film Mode>
The <Film Mode> feature offers you a theatre-quality viewing experience.
- <Off> - <Auto1> - <Auto2>
<Film Mode> is supported in <TV>, <Component> (480i / 1080i) and <HDMI>(480i / 1080i)
• <Auto Protection Time>
Set the time the screen remains idle with a still image until the screen saver is activated. The
screen saver prevents the formation of ghost images on the screen.
- <2 hours> - <4 hours> - <8 hours> - <10 hours> - <Off>
Picture Reset Picture parameters are replaced with the factory default values.
• <OK> - <Cancel>
MENU DESCRIPTION