I OPERATION [
Storing Channels in Memory (Automatic Method)
_ksb select the correct
signa! source (AN[, STD,
: NRC,IRC).See steps _4
: On previous pagel
Press the Monu button,
then press the CHT but-
ton twice to highlight
J_T/P.AT_
] Rt_ tur_
LNA
4 ....
OMove ±E_._EXR
Press the VOL + button to
access the CHANNEL
sub,menu, ....
z
: Press the CHY button to
select the YAuto pro-
gram"
-_1 The TV automattca/ty cycles
through all of the available channels
and stores them in memory. "_'his
takes about one to two minutes.
Press VOL+ at any time to interrupt
the memorization process and return
to the CI]ANNEL menu.
A ter alt the available chaonOs are stored, the Auto p_ogram
menu reappears, Press the Menu button three times to exJb
Note: Channelauto program does not function when the
V.chip is active. .....
3 6 £ AI, L1 , t/ [V )_ MJON
To Next Page
Loading...
