26
Preparations
1
1 Preparations
1.3.2 Removing the Stand
Place a soft cloth over the table to protect the product and
place the product onto the cloth so that the front of the product
faces downwards.
To disassemble the stand from the monitor, make sure to press
the lower part of the monitor with one hand, and pull and sway
sideways the stand with the other hand, as shown in the
picture.
Turn the connecting screw at the bottom of the stand base to
separate it.
Remove the stand neck from the stand base by pulling it in the
direction of the arrow as shown in the figure.
To Next Page
Loading...
