81
Information Menu and Others
7
7 Information Menu and Others
7.2 Configuring Eye Saver Mode, Brightness, and Contrast
from the Initial Screen
Adjust the Brightness, Contrast and Eye Saver Mode by moving the JOG button.
Eye Saver Mode
Not available when PIP/PBP Mode is set to On.
Brightness
This menu is not available when Bright is set to Dynamic Contrast mode.
This menu is not available when Eco Saving Plus is enabled.
This menu is not available when Eye Saver Mode is enabled.
Contrast
This option is not available when Bright is in Cinema or Dynamic Contrast mode.
This menu is not available when Game Mode is enabled.
This menu is not available when PIP/PBP Mode is set to On and the Size is set to
(PBP Mode).
1 When you control the JOG button UP/DOWN, the following screen will appear.
The following screen will appear.
2 Move the JOG button UP/DOWN to select Brightness, Contrast or Eye Saver Mode.
3 Move the JOG button LEFT/RIGHT to adjust the Brightness, Contrast or Eye Saver Mode setting.
To Next Page
Loading...
