Samsung U24E590D

76
Setup and Reset
6
6 Setup and Reset
6.6 Source Detection
You can activate Source Detection.
Not available when PIP/PBP Mode is set to On.
6.6.1 Configuring Source Detection
1 When the Function Key Guide appears, select [ ] by moving the JOG button UP.
Next, press the JOG button.
2 Move to System controlling the JOG button UP/DOWN and press the JOG button.
3 Move to Source Detection controlling the JOG button UP/DOWN and press the JOG button.
The following screen will appear.
 Auto: The input source is automatically recognized.
 Manual: Manually select an input source.
4 Move to the desired option controlling the JOG button UP/DOWN and press the JOG button.
5 The selected option will be applied.
Off
Off
1.2
Auto
Decide how input
sources will be
detected.
FreeSync
Eco Saving Plus
Off Timer
PC/AV Mode
DisplayPort Ver.
Source Detection
Key Repeat Time
System
Return
Auto
Manual