Samsung U24E590D

68
6 Setup and Reset
6
Setup and Reset
A detailed description of each function is provided. Refer to your product for details.
6.1 FreeSync
 The functions available on the monitor may vary depending on the model. Refer to the actual
product.
 FreeSync is a DisplayPort 1.2 function, so the choice of the DisplayPort Ver. 1.1 in OSD, or when
the access of HDMI signal, the FreeSync function is not available. Make sure to use a Samsung
DP cable. DP cables not supplied by Samsung may not be compatible with the product.
 Not available when PIP/PBP Mode is set to On.
 The sound quality of the monitor may decrease if FreeSync is enabled.
6.1.1 Configuring FreeSync
1 When the Function Key Guide appears, select [ ] by moving the JOG button UP.
Next, press the JOG button.
2 Move to System controlling the JOG button UP/DOWN and press the JOG button.
3 Move to FreeSync controlling the JOG button UP/DOWN and press the JOG button.
The following screen will appear.
U28E590D
 Off: Disable FreeSync.
 On: Enable the basic FreeSync functions of the AMD graphics card.
On
1.2
Auto
Acceleration
FreeSync technology
is solution that
eliminates screen
tearing without all the
usual lag and latency.
FreeSync can be
operated when you
use AMD's graphic
card with supporting
Freesync solution.
FreeSync
Eco Saving Plus
Off Timer
PC/AV Mode
DisplayPort Ver.
Source Detection
Key Repeat Time
System
Return
Off
On